ELEGOO 3D Printer Resin Water Wash Resin 405nm Rapid UV Curing Standard Photopolymer Resin Easy to Clean High Accuracy…
$23.99
Make sure this fits by entering your model number.
【Water Washable】 Unlike standard resin, water-washable resin is highly hydrophilic, that is easy to be cleaned by water, you don’t have to buy alcohol to clean. Save your time and money.
【High Precision & Low Shrinkage 】 Water Washable Resin is Features by low viscosity, which can reduce the volume shrinkage during the photocuring process, thereby ensuring the high precision of the printed model.
Description
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”all the way through molding.
- The finished product has a smooth surface,high precision and certain toughness.
- After printing, the workpiece can be washed directly with water without sticking to hands.
ELEGOO Water Washable Resin
Storage Method
- Please store the product in a dry, ventilated, non-corrosive room, and not in a sun or humid place.
- The shelf life is 2 years. (The resin has the best effect when stored at 25°-30°)
Product Parameters
- Shore Hardness: 80-85D
- Maximum Force (KGF): 139.52±10%
- Tensile Strength (MPA): 32.89±10%
- Deformation at the Point of Maximum Force (mm): 8.457±10%
- Yield Point Elongation (%): 6.631±10%
- Elongation at Break (%): 14.967±10%
- Tensile Modulus (MPA): 368.23±10%
- Maximum Bending Strength (MPa): 34.748±10%
- Flexural Modulus of Elasticity (MPa): 618.521±10%
- Impact Strength (j/m): 78.045±10%
- Absorption Band: 385nm-410nm
- Viscosity: 100-350MPa·s
- Density: 1.05-1.25g/cm³
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”it may be washed by water. This can save your money and time.
(Do not dump the waste water directly. Expose the waste water with sunlight before dumping.)
High Precision
Water washable resin is designed for reducing volume shrinkage all through the photocuring process , which bring smooth surface with high resolution for print model. Perfectly restore the 3D printed works.
Fast Curing & Great Toughness
Water wash resin significantly shortens the curing time as a result of its excellent fluidity. The finished product has certain toughness.
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”prime quality pigments and photo initiators, the model printed with resin has very pure and stunning color effects, presenting you with a more perfect printed model.
Wide Applications
Compatible for most LCD DLP 3D printers. Such as ELEGOO Mars/Anycubic Photon/Nova 3D and most of LCD/DLP 3D printer in the market. Save the price of your hobby.
Printing Setting (for ELEGOO printer )
- Bottom exposure time: 20-60s
- Normal exposure time: 2-15s
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”must not keep up a correspondence with eyes, skin or clothes, and will have to not be tasted or eaten. Use it only under good ventilation. Please pay attention to air circulation and take protective measures. Wash thoroughly after operation.
- The product is in a liquid state and has a slight odor. Please wear a mask when the use of it to avoid inhalation of aerosol and cause infection.
- The product will have to be stored in a sealed container. After use, it will have to be sealed in time and placed in a dry and well-ventilated place. It will have to not be exposed to the sun.
- If you by accident touch the skin, wash your skin with soap and water or seek medical attention.
- If you by accident touch your eyes, open your eyelids immediately, rinse with soapy water for about 20 minutes, and seek medical attention in time.
- If by accident inhaled or swallowed, do not induce vomiting, keep resting, and send to the hospital for remedy in time.
- Disposal of waste in accordance with local environmental regulations and requirements.
ELEGOO Saturn S | ELEGOO Mars 3 | ELEGOO Neptune 2S | ELEGOO Merucury Plus 2.0 | ELEGOO Mercury X Bundle | |
---|---|---|---|---|---|
Category | Resin 3D Printer | Resin 3D Printer | FDM 3D Printer | Wash Cure Machine | Wash Cure Machine |
Make sure this fits by entering your model number.
【Water Washable】 Unlike standard resin, water-washable resin is highly hydrophilic, that is easy to be cleaned by water, you don’t have to buy alcohol to clean. Save your time and money.
【High Precision & Low Shrinkage 】 Water Washable Resin is Features by low viscosity, which can reduce the volume shrinkage all through the photocuring process, thereby ensuring the high precision of the printed model.
【Fast Curing & Low Odor】 The UV resin has high fluidity and fast curing speed, which can shorten printing time and increase printing speed. It is environmentally friendly, without VOC and no irritating gas.
【Wide Compatibility】 Compatible for ELEGOO MARS, Anycubic Photon and most of LCD/DLP 3D printer in the market. Its excellent stability ensures the printing experience and successful printing.
【Perfect Packaging】 The leak-proof bottle is packed with bubble bag and packing box to prevent resin leakage. No worries for leakage.
Related Products
-
LEE FUNG ABS 3D Printer Filament 1.75mm,1kg (2.2lbs) Spool, Dimensional Accuracy +/- 0.05 mm Flou Orange
Buy Now -
Dremel DigiLab – Silver PLA Filament
$34.85 Buy Now -
Flashforge – Gray PLA Filament
Buy Now -
Silver Silk Metallic Shiny PLA 1.75mm 3D Printer Filament, 1kg Spool (2.2lbs) 3D Printing Material,for FDM Printers
$39.99 Buy Now -
Dremel DigiLab – Gold PLA Filament
$32.99 Buy Now -
3D Solutech Black PLA Filament (1.75mm)
Buy Now -
SainSmart Water Washable Colored IPA-Free Resin for LCD/MSLA 3D Printers, 405nm UV-Curing Rapid Resin, Low Odor, 500g…
Buy Now -
Solutech – Silver Metal Premium PLA Filament
Buy Now -
eSUN 2.85mm Black ABS Plus Filament, 1kg Spool (2.2lbs), Black
Buy Now -
Paramount 3D ABS (Skin – Ivory) 1.75mm 1kg Filament [IRL10147501A]
$21.99 Buy Now -
Sale!
Flashforge White Water Washable LCD Resin (1000kg)
$25.99Original price was: $25.99.$12.99Current price is: $12.99. Buy Now -
Ultimaker 3 NFC Nylon Filament – Black
$81.00 Buy Now -
MKOEM 7 Color Pack PLA Filament (1.75mm) Bundle Red Orange Yellow Green Cyan Blue Purple
$28.99 Buy Now -
CC3D Silk PLA Shiny Teal Blue PLA Filament 1.75 mm
Buy Now
Reviews
There are no reviews yet.