ELEGOO 3D Printer Resin 405nm LCD Fast UV Curing Standard Resin Photopolymer Resin High Precision Non Toxic Low Odor for…
$24.99
Make sure this fits by entering your model number.
【High Precision & Low Shrinkage 】 The professional resin is designed for reducing the volume shrinkage during the photocuring process which ensures the high precision and smoothness of the printed model.
【Quick Curing & Excellent Fluidity】 The 3D printing rapid resin has high fluidity and low viscosity.It can improve the curing speed and shorten the time without any impact on its quality.Make you have a efficient printing experience.
Description
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”all over molding.
- It has higher hardness and certain toughness after curing.
- The finished product has a smooth surface and high precision.
ELEGOO Standard Photopolymer Resin
Storage Method
- Please store the product in a dry, ventilated, non-corrosive room, and not in a sun or humid place.
- The shelf life is 2 years. (The resin has the best effect when stored at 25°-30°)
Product Parameters
- Shore Hardness: 85-88D
- Maximum Force (KGF): 143.3±10%
- Tensile Strength (MPA): 33.781±10%
- Deformation at the Point of Maximum Force (mm): 4.934±10%
- Yield Point Elongation (%): 4.555±10%
- Elongation at Break (%): 8.775±10%
- Tensile Modulus (MPA): 520.969±10%
- Maximum Bending Strength (MPa): 30.115±10%
- Flexural Modulus of Elasticity (MPa): 708.592±10%
- Impact Strength (j/m): 24.2068±10%
- Absorption Band: 355nm-410nm
- Viscosity: 200-400MPa·s
- Density: 1.05-1.25g/cm³
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”right through printing. With this printer resin, the model has high precision with smooth surface and clear detail. No deformation or noticeable shrinkage.
Fast Curing
Standard rapid resin is designed for 405nm LCD printers, which ensures the strength of the model without excessive shrinkage and shorten the curing time.
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”will have to not keep up a correspondence with eyes, skin or clothes, and must not be tasted or eaten. Use it only under good ventilation. Please pay attention to air circulation and take protective measures. Wash thoroughly after operation.
- The product is in a liquid state and has a slight odor. Please wear a mask when the use of it to avoid inhalation of aerosol and cause infection.
- The product must be stored in a sealed container. After use, it must be sealed in time and placed in a dry and well-ventilated place. It must not be exposed to the sun.
- If you by accident touch the skin, wash your skin with soap and water or seek medical attention.
- If you by accident touch your eyes, open your eyelids immediately, rinse with soapy water for about 20 minutes, and seek medical attention in time.
- If by accident inhaled or swallowed, do not induce vomiting, keep resting, and send to the hospital for remedy in time.
- Disposal of waste in accordance with local environmental regulations and requirements.
ELEGOO Saturn S | ELEGOO Mars 3 | ELEGOO Neptune 2S | ELEGOO Mercury Plus 2.0 | ELEGOO Mercury X Bundle | |
---|---|---|---|---|---|
Category | Resin 3D Printer | Resin 3D Printer | FDM 3D Printer | Wash Cure Machine | Wash Cure Machine |
Make sure this fits by entering your model number.
【High Precision & Low Shrinkage 】 The professional resin is designed for reducing the volume shrinkage all through the photocuring process which ensures the high precision and smoothness of the printed model.
【Quick Curing & Excellent Fluidity】 The 3D printing rapid resin has high fluidity and low viscosity.It can toughen the curing speed and shorten the time without any affect on its quality.Make you have a efficient printing experience.
【Lower Odor & Quality Materials】 The resin is specially designed for 3D printers,its formula can perfectly reduce odors.Without VOC and no irritating gas.Optimize the user’s experience all through the printing process.
【High Compatibility】 Not only suitable for most LCD/DLP 3D printers,such as ELEGOO MARS,Anycubic Photon,Nova,and so on.But also saves the price of your hobby.
【Well Packed】 The LCD resin leak-proof bottle is safely packed in bubble wrap and package box.Make sure it meets you in the best condition.No worries for leakage.
Related Products
-
PLA Filament 1.75mm, PLA 3D Printer Filament Blue 1KG Spool, Dimensional Accuracy +/-0.02mm, PLA Twinkle Blue
Buy Now -
Voxelab – Silk Gray PLA Filament
$21.99 Buy Now -
Fused Materials – Transparent Purple PETG Filament
$24.99 Buy Now -
i-Found 3D Printer Resin, LCD UV-Curing Resin Compatible with Any LCD 3D Printing,405 nm Standard photopolymer Resin…
Buy Now -
Eryone – Copper Ultra Silk PLA Filament
$23.99 Buy Now -
BIQU – Olive Green PLA Filament
Buy Now -
Gizmo Dorks – Color Change Blue to White PLA Filament
$33.95 Buy Now -
3DXTECH CarbonX Carbon Fiber PETG 500g (1.75mm)
Buy Now -
MakerBot-MP05779 PLA Filament, 1.75 mm Diameter, Large Spool, Red
$46.30 Buy Now -
3DXTECH – Black ABS Filament
Buy Now -
GNVTNTP – Multi-Color Macaron PLA Filament (4-Pack)
Buy Now -
LEE FUNG ABS 3D Printer Filament Wood
Buy Now -
3DXTECH – Black ABS Filament
Buy Now -
PLA Filament, 1.75mm 3D Printer Filament, PLA 3D Printing 1KG Spool, Dimensional Accuracy +/- 0.02mm, Red
Buy Now
Reviews
There are no reviews yet.