RESIONE 3D Printer Resin, M70 405nm UV-Curing Resin Rigid Standard Photopolymer Resin with High Precision and Low Odor…
$55.00
Make sure this fits by entering your model number.
【Clear and sharp details】M70 3d resin will not be easily overexposed, the details of the 3D printed miniatures or hobby are still clear even after spraying and coloring.
【Smooth surface and wear-resistant】The nano-filler in M70 3d resin can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.Of course, nano-filler does not make the surface of the prints completely free of layer lines.
Description
M70 is high precision rigid resin,the prints have sharp details and aren’t easily warped.And nano powder can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.This can be a good choice for printing miniatures and garage kit(GK). The wavelength range is 385-405nm, suitable for mainstream LCD/MSLA/DLP 3d printers on the market, such as: all series of Nova3d, Longer, QIDI TECH, Phrozen, Creality,Anycubic, Elegoo resin 3d priner
M70 High Precision 3D Printer Resin
Printing Settings
- Layer thickness: 0.025-0.05mm
- Bottom exposure time: 30-60s
- Normal exposure time: 2-12s
If you want specific settings, please visit the RESIONE official website
Cleaning and Post-curing
- Cleaning tools: Soft brush or 2 in 1Wash Cure Machine (Do Not use ultrasonic cleaner)
- Cleaning time: 4min
- Cleaning solvent: 75%-95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 1min
NOTICE
- Before printing: confirm whether the build plate is flat, and level the plate.
- Leveling:place 4 sheets of paper on the 4 corners between the plate and LCD screen, press the plate and tighten the screws in diagonal order.
- Slicing:turn off the anti-aliasing function.
- Post-curing: both the back and front sides of the prints will have to be cured.Post-curing in water is a better choice(Double the curing time).
- Layer thickness: 0.025-0.05mm
- Shore Hardness: 89D
- HDT(0.455MPa) :68℃
- Tensile Strength: 32MPa
- Flexural Strength: 51Mpa
- Notched IZOD: 6.5J/m
- Elongation at Break: 9%
- Viscosity(28℃): 590mpa.s
|
|
|
---|---|---|
Clear and sharp detailsM70 3d resin will not be easily overexposed, the details of the 3D printed miniatures or hobby are still clear even after spraying and coloring. |
Low shrinkageThe nano-filler in M70 3d printer resin makes the shrinkage of the prints very low.Therefore, the prints will not be severely deformed or cracked after a long time. |
Smooth surface and wear-resistantThe nano-filler in M70 resin can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.Of course, nano-filler does not make the surface of the prints completely free of layer lines. |
M70 is high precision rigid resin,the prints have sharp details and aren’t easily warped.And nano powder can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.This can be a good choice for printing miniatures and garage kit(GK).
Precautions
USE:
1. Operating temperature : 20~35℃,68℉~95℉
2. Shake well before each use. If the resin is very viscous, preheat the bottle with 60℃ warm water before shaking it.
3. Please wear nitrile rubber gloves throughout operation and keep the operating environment well ventilated.
4. Do not use resin near windows, balconies or other strong ultraviolet environment.
5. If you unintentionally get resin into your eyes, mouth or nose, rinse immediately with a variety of water and consult a doctor.
6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc.
7. Caution for people allergic to acrylics.
Waste liquid:
1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
2. If This can be a cleaning fluid containing resin, please do not discharge it directly into the sewer. You’ll be able to put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used ceaselessly.
Storage:
1. Store in a sealed, shading, and cool place.
2. Keep away from fire.
3. Keep out of reach of children.
4. If the resin is not used in the 3D printer for more than 3 days, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins.
Make sure this fits by entering your model number.
【Clear and sharp details】M70 3d resin will not be easily overexposed, the details of the 3D printed miniatures or hobby are still clear even after spraying and coloring.
【Smooth surface and wear-resistant】The nano-filler in M70 3d resin can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.Of course, nano-filler does not make the surface of the prints completely free of layer lines.
【Low shrinkage】The nano-filler in M70 3d printer resin makes the shrinkage of the prints very low.Therefore, the prints will not be severely deformed or cracked after a long time.
【Removing the supports will not damage prints】Just the right mechanical properties,the supports can be easily removed without any tools and will not damage the surface of the model.
【Low odor】RESIONE insists on selecting high-quality and higher-purity raw materials, free of harmful substances, and lower volatile VOCs.
Additional information
Color |
---|
Related Products
-
JAYO 3D Printer Resin, 405nm UV-Curing Resin, Rapid Standard Photopolymer Resin with High Precision, 3D Printing Liquid…
Buy Now -
Creality 3D Printer Resin, 405nm LCD DLP UV-Curing Standard Rigid Resin with High Precision Low Viscosity Fast Curing…
$54.99 Buy Now -
Hatchbox – Black PETG Filament
$24.99 Buy Now -
Water Washable Resin Durable Non-Brittle Low Odor 3D Printer Resin Optimized for Mono LCD Made in The USA 405nm…
$49.99 Buy Now -
Silk Bronze PLA Filament 1.75mm 3D Printer Filament 1KG 2.2 LBS Spool 3D Printing Materials IEMAI Shine Silky Shiny…
$17.99 Buy Now -
DR.3D 3D Printer High Clear Resin, 405nm Acrylic Like 3D Resin for LCD 3D Printer, Low Oder 3D Printing Resin…
Buy Now -
Duramic 3D – Transparent PETG Filament
$19.99 Buy Now -
Zortrax Z-ABS 2 Filament – 1.75mm – 800g Spool (White)
Buy Now -
Gizmo Dorks – Metal Bronze Fill Filament
$9.95 Buy Now -
Sale!
Dremel DigiLab – Purple PLA Filament
$32.99Original price was: $32.99.$31.03Current price is: $31.03. Buy Now -
RESIONE 3D Printer Resin, M70 405nm UV-Curing Resin Rigid Standard Photopolymer Resin with High Precision and Low Odor…
$55.00 Buy Now -
Amolen – Glow in The Dark Multicolor PLA Filament
$32.99 Buy Now -
BBLIFE – Silk Peacock Blue PLA Filament
$23.99 Buy Now -
LEE FUNG ABS 3D Printer Filament Purple
$18.99 Buy Now
Reviews
There are no reviews yet.