FYSETC 3D Printing Build Plate Flexible Spring Steel Sheet Bed 150x150mm/ 5.9×5.9 inch with Thin PEI Magnetic Mounting Base Compatible with QiD x-one2/X-One Heated Bed Parts

Description

PEI Sheet Use：
Compatible with PLA ABS PETG TPU and other most filaments. When the print is completed, let the bed cool, and the part will be easy to release from the PEI surface. Parts are in fact easier to remove if released before the bed becomes completely cold.

Magnetic Base:
Magnetic base that is adhesive-backed for easy installation
PEI Sheet Maintenance:
Clean in between prints with isopryl alcho and a lint free rag. Acetone can be utilized instead of isopryl alcoh, but the bed Will have to be cold if acetone is used. Optionally, light sanding with 600-1000 grit sand paper may also be done after a whole lot of printing to give the PEI sheet more life.

Package Includes:
1X 150mm/5.9 inch Steel Spring with sticked PEI
1X 150mm/5.9 inch Magnetic sticker B side

Make sure this fits by entering your model number.
A Will have to Upgrade 3D Printer Accessories: 3 in 1 new version, more stable, reliable, high temperature, compatible with your Qi x-one2 Printer hotbed.
Size LW: 150x150mm/ 5.9×5.9 inch, Easier removal because of high flexibility of steel plate. Only one side with PEI, is to print on.
Easy to install: peel off the back paper on the magnetic base and stick it to the original platform, align the steel plate to base, the side with pei is upside.
Kindly Tips: We have sticked PEI on the steel plate, by machine, so you do not want to worry about bubbles. But before printing, please remove the protect film which stick on the PEI surface.
The PEI has been pasted, If PEI is damaged throughout use, you’ll tear it off from the steel plate and purchase an individual PEI to replace it.