CC3D – Color Change Purple to Red PLA Filament

Description

Purple to Red PLA filament
Specification:
Material: PLA
Color: Purple to Red
Net Weight: 2.2 pounds (1kg)
Diameter (Tolerance): 1.75 mm ±0.05 mm
Print Temp: 195-230℃
Print speed: 30-60 mm/s
Please Pay Attention:
Retract the filament if you’re going leave your printer inactive for somedays.
Store this filament in a dry and sealed bag or box to extend the life of your filament.
When storing the filament, Please pass the loose end through the hole on the edge of the filament reel, this can steer clear of entanglement.
It may be fed appropriately and properly whilst you use it next time.

Make sure this fits by entering your model number.
Temperature color change: Under 31ºC it looks Purple and above that it starts change to red.
Feed smoothly and repeatedly without clogging the nozzle or extruder, perfectly compatible with among the FDM 3D Printer
Really useful Extrusion (205~210℃); Really useful print speed(Below 30mm/s); No heating bed requirement in summer, it’s best to warm up the hot bed to about 60 °C in wintering Filament
1 KG (approximately 2.20 lbs) Spool,1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament