Aibesy 405nm 3D Rapid Resin LCD Curing Resin High Precision Quick Curing Photopolymer Resin Low Odor for LCD 3D Printing…

Description

Features:
General-purpose rapid resin, with great hardness and toughness, low shrinkage, can achieve better printing effect.
Good fluidity and fast curing speed, which can significantly reduce printing time. Great stability ensures the success rate of printing.

Specifications:
Color: White/ Skin Color/ Transparent(optional)
Bottle Material: Plastic
Capacity: 1000g
Apply: For DLP/LCD 3D Printer
Solidify Wavelength: 395-405nm
Hardness: 84D
Viscosity(25℃): 100-150 mPa·s
Shrinkage of Vol.: 3.8-4.3%
Density: 1.1-1.15g/cm3
Tensile Strength: 35-52Mpa
Elongation at Break: 11-20%
Flexural Strength: 59-70Mpa
Flexural Modulus: 1800-2300pa
Item Size: 21.5 * 9.1 * 9.1cm/ 8.5 * 3.6 * 3.6in
Package Size: 28 * 12 * 12cm/ 11.0 * 4.7 * 4.7in
Package Weight: 1200g/ 42.3oz

Note:
1. The product is for one-time use and can not be reused.
2. Please shake the resin and place it for 30 minutes before use. Stating for 30 minutes removes bubbles generated all through shaking.
3. Wear gloves before use to steer clear of direct contact with the skin and keep the room ventilated, protective measures will have to be taken and thoroughly cleaned after operation.
4. It is suggested that ambient temperature be controlled at 25-30℃, to steer clear of direct light all through use.
5. Store under cool, shade and dry environment without direct, beneficial storage environment temperature of 25-30℃.
6. Abandoned bottle will have to be disposed of in accordance with local environmental regulations.
7. As a result of light, screen resolution and other factors, there will be some differences between the actual color and the picture display color of the finished products. Please be mindful. Thank you.

Packing List:
1 * Bottle Resin Material

Make sure this fits by entering your model number.
Prime quality photopolymer resin with high hardness(84D), low odor.
General-purpose rapid resin, with great hardness and toughness, low shrinkage, can achieve better printing effect.
Good fluidity and fast curing speed, which can significantly reduce printing time. Great stability ensures the success rate of printing.
The surface of finished articles is smooth and high precision for comfortable feeling.
Compatible with most DLP/LCD light curing 3D printer, and widely used in teaching, toy design, jewelry, handicrafts, and so on.