RESIONE G217 Clear 3D Printer Resin ABS-Like Non-Yellowing Tough&Rigid Resin for DLP MSLA LCD 3D Printing (1000g)
$74.99
Make sure this fits by entering your model number.
【Clear】The raw materials of G217 resin are all clear and transparent. RESIONE strictly controls the production process, and no impurities remain in the raw materials. After sanding and spraying clear varnish or G217 resin, the print will become completely transparent (slightly bluish).
【Non-yellowing】Ordinary resin will slowly turn yellow over time, but G217 resin will not. G217 prints may turn yellow after post-curing, but will fade within a few days until the transparent color is restored.
Description
G217 is a clear(Reasonably blue), non-yellowing, tough resin. After sanding off the stratification on the surface of the prints, they’re going to become completely clear.
The wavelength range is 385-405nm, suitable for mainstream LCD/MSLA/DLP 3d printers on the market, such as: a full range of Nova3d, Longer3d, QIDI TECH, Phrozen, Creality, Anycubic, Elegoo resin 3d printers.
G217 Clear ABS-Like Resin
Printing Settings
- Layer Height(mm):0.05mm
- Bottom exposure time: 30-55s
- Normal exposure time: 2.3-13.4s
If you wish to have specific settings, please visit the RESIONE official website
Cleaning and Post-curing
- Cleaning tools: Soft brush or Ultrasonic cleaner or 2 in 1Wash Cure Machine
- Cleaning time: 2min
- Cleaning solvent:95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 2-4min
Notice!!!
- The print is translucent after cleaning.Sand the prints with coarse and fine sandpaper and spray varnish or G217 liquid, the print will become transparent.
- Resin liquid and prints are transparent but Reasonably bluish.
- After curing the prints under high-power UV light, the print may turn yellow Reasonably, but it is going to automatically fade within a few days.
Resin Parameters
- Shore Hardness:90D
- Tensile Strength:65.3MPa
- Flexural Strength:77.3MPa
- Elongation at Break:10.4%
- Viscosity(25℃):396mpa.s
- Notched IZOD:30.78J/m
Clear(Reasonably blue)The raw materials of G217 resin are all clear and transparent. RESIONE strictly controls the production process, and no impurities remain in the raw materials. After sanding and spraying clear varnish or G217 resin, the print will become completely transparent (Reasonably bluish). | Non-yellowingUnusual resin will slowly turn yellow over time, but G217 resin will not. G217 prints may turn yellow after post-curing, but will fade after a few days until the transparent color is restored. | Sturdy like ABSThe mechanical properties of the G217 resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent affect strength. The prints can be machined repeatedly. |
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”throughout operation and keep the operating environment well ventilated.
- Do not use resin near windows, balconies or other strong ultraviolet environment.
- If you unintentionally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
- The resin remaining on the skin can be washed with soap, hand sanitizer, etc.
- Caution for people allergic to acrylics.
Waste liquid:
- If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
- If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You’ll put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used regularly.
Storage:
- Store in a sealed, shading, and cool place.
- Keep away from fire.
- Keep out of reach of children.
- If the resin is not used in the 3D printer for more than 1 day, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins.
Make sure this fits by entering your model number.
【Clear】The raw materials of G217 resin are all clear and transparent. RESIONE strictly controls the production process, and no impurities remain in the raw materials. After sanding and spraying clear varnish or G217 resin, the print will become completely transparent (Reasonably bluish).
【Non-yellowing】Unusual resin will slowly turn yellow over time, but G217 resin will not. G217 prints may turn yellow after post-curing, but will fade within a few days until the transparent color is restored.
【Sturdy like ABS】The mechanical properties of the G217 resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent affect strength. The prints can be machined repeatedly.
【High-quality raw materials】RESIONE only selects high-purity and low-irritating raw materials. No harmful substances remain.
【Wide adaptability】Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market.
Related Products
-
White, Black, Blue, Red PLA Filament Bundle
$21.99 Buy Now -
Sindoh 3DWOX Refill Filament ABS Green (Compatible with DP200, 3DWOX 1, 1X, 2X), Spool 1.75mm Diameter
Buy Now -
3D Solutech Silver Metal PLA Filament (1.75mm)
Buy Now -
Rich-OPTO 3D Printer Resin UV-Curing 405nm Rapid High Precision Quick Curing Standard Photopolymer Resolution Low Odor…
$9.99 Buy Now -
ELEGOO ABS-Like Clear Blue 1000G 3D Printer Resin, 405nm UV-Curing LCD Resin High Precision Fast Curing Non-Brittle…
$36.99 Buy Now -
JAYO 3D Printer Resin, 405nm LCD Rapid UV-Curing Resin, Standard Photopolymer Resin with High Precision for LCD 3D…
Buy Now -
Atomic – Black ABS Filament
$32.99 Buy Now -
Hatchbox 3D – Black Wood Filament
$30.99 Buy Now -
PLA 3D Printing Filament – ALLTIME3D – Hot Pink 300g (0.66lbs) – 1.75mm Dimensional Accuracy +/- 0.05mm 3D Printer Pen…
$14.15 Buy Now -
Dremel DigiLab – Translucent PLA Filament
$32.99 Buy Now - Sale!
MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Cool Gray, MP05784
$48.00$34.71 Buy Now -
Gizmo Dorks – Black ABS Filament
$99.95 Buy Now -
BUMAT Elite Metal Filled Filament | 1.75mm (Bronze) with Dimensional Accuracy +/- 0.02mm
Buy Now -
Dremel DigiLab -White PLA Filament
$35.15 Buy Now
Reviews
There are no reviews yet.