RESIONE 3D Printer Resin, M70 405nm UV-Curing Resin Rigid Standard Photopolymer Resin with High Precision and Low Odor…

$55.00

Categories: High Precision Resin, Low Odor Resin, Materials, Resins, Rigid Resin

Description
Reviews (0)

Description

RESIONE M70 3D printer resin:clear and sharp details,low shrinkage,low odor,wear-resinstant

M70 is high precision rigid resin,the prints have sharp details and don’t seem to be easily warped.And nano powder can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.This is a good choice for printing miniatures and garage kit(GK). The wavelength range is 385-405nm, suitable for mainstream LCD/MSLA/DLP 3d printers on the market, such as: all series of Nova3d, Longer, QIDI TECH, Phrozen, Creality,Anycubic, Elegoo resin 3d priner

M70 High Precision 3D Printer Resin

Printing Settings

Layer thickness: 0.025-0.05mm
Bottom exposure time: 30-60s
Normal exposure time: 2-12s

If you wish to have specific settings, please visit the RESIONE official website

Cleaning and Post-curing

Cleaning tools: Soft brush or 2 in 1Wash Cure Machine (Do Not use ultrasonic cleaner)
Cleaning time: 4min
Cleaning solvent: 75%-95% Ethanol or IPA
Post-curing light source: 385-405nm UV(40W)
Post-curing time: 1min

NOTICE

Before printing: confirm whether the build plate is flat, and level the plate.
Leveling:place 4 sheets of paper on the 4 corners between the plate and LCD screen, press the plate and tighten the screws in diagonal order.
Slicing:turn off the anti-aliasing function.
Post-curing: both the back and front sides of the prints must be cured.Post-curing in water is a better choice(Double the curing time).

Layer thickness: 0.025-0.05mm
Shore Hardness: 89D
HDT(0.455MPa) :68℃
Tensile Strength: 32MPa
Flexural Strength: 51Mpa
Notched IZOD: 6.5J/m
Elongation at Break: 9%
Viscosity（28℃）: 590mpa.s


Clear and sharp details M70 3d resin will not be easily overexposed, the details of the 3D printed miniatures or hobby are still clear even after spraying and coloring.	Low shrinkage The nano-filler in M70 3d printer resin makes the shrinkage of the prints very low.Therefore, the prints will not be severely deformed or cracked after a long time.	Smooth surface and wear-resistant The nano-filler in M70 resin can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.Of course, nano-filler does not make the surface of the prints completely free of layer lines.

RESIONE M70 3d resin prints show

Precautions

USE：

1. Operating temperature : 20~35℃,68℉~95℉

2. Shake well before each use. If the resin is very viscous, preheat the bottle with 60℃ warm water before shaking it.

3. Please wear nitrile rubber gloves all over operation and keep the operating environment well ventilated.

4. Do not use resin near windows, balconies or other strong ultraviolet environment.

5. If you unintentionally get resin into your eyes, mouth or nose, rinse immediately with a lot of water and consult a doctor.

6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc.

7. Caution for people allergic to acrylics.

Waste liquid：

1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.

2. If This is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You’ll put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used often.

Storage：

1. Store in a sealed, shading, and cool place.

2. Keep away from fire.

3. Keep out of reach of children.

4. If the resin is not used in the 3D printer for more than 3 days, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins.


	F69 Flexible Black Rubber-like Resin	M58 Grey Tough&Hard Resin	K Black Tough Resin	G217 Clear Non-yellowing Tough&Hard Resin	W90B Water-washable Resin	M70 High-precision Resin

Make sure this fits by entering your model number.
【Clear and sharp details】M70 3d resin will not be easily overexposed, the details of the 3D printed miniatures or hobby are still clear even after spraying and coloring.
【Smooth surface and wear-resistant】The nano-filler in M70 3d resin can fill the layer pattern on the surface of the print to a certain extent,the surface of the print is smooth and wear-resistant.Of course, nano-filler does not make the surface of the prints completely free of layer lines.
【Low shrinkage】The nano-filler in M70 3d printer resin makes the shrinkage of the prints very low.Therefore, the prints will not be severely deformed or cracked after a long time.
【Removing the supports will not damage prints】Just the right mechanical properties,the supports can be easily removed without any tools and will not damage the surface of the model.
【Low odor】RESIONE insists on selecting high-quality and higher-purity raw materials, free of harmful substances, and lower volatile VOCs.