BIQU Resin Build Plate+Magnetic Sheet,196X126mm Resin Flexible Steel Plate Flex Bed for Elegoo Saturn V2 3D Printer (7.7X5inch),Sliver

BIQU Resin Build Plate And Magnetic Sheet (196X126mm)

$12.99

BIQU Resin Build Plate + Magnetic Sheet is flexible, removable, and the easiest to install. Not only that, it is easy to clean, offers excellent adhesion to the resin models, and allows effortless removal of the prints without the need for tools.

Categories: Accessories, Build Platforms

Description
Reviews (0)

Description

BIQU Resin Build Plate And Magnetic Sheet is a dual-sheet 3D build surface. The upper sheet “A” is made up of spring steel and is flexible while the lower sheet “B” is magnetic and adhesive.

Sheet A is the actual build surface and will hold the 3D models while sheet B will be attached to the hotbed and hold sheet A.

In addition, the BIQU Resin Build Plate is super easy to install and requires 3 minutes and 3 steps: 1. Peel off the sticker on Sheet B and stick it to the printer’s hotbed, 2. Adsorb sheet A onto sheet B (if it doesn’t absorb properly, rotate it to 90 degrees and try again), 3. Level the 3D printer and it will be ready to generate your dream models!

Moreover, the BIQU Resin Build Plate And Magnetic Sheet is super flat and flexible, allowing easy removal of the 3D models. You need to slightly bend the plate and see how your print falls right into your hands.

Its surface is treated with special wire drawing, enabling the surface to firmly hold the models, and enhance its durability, and precision of printing.

BIQU Resin Build Plate And Magnetic Sheet is available in several sizes suitable for different brands and types of printers. For example,

192X120mm for ELEGOO Saturn V1
140X84mm for Mars 2 Pro
150X95mm for Mars 3
135X75mm for RLRGOO Mars
135X80mm for Photon Mono
202X128mm for Mono X

Technical Specifications:

Brand: BIQU
Color: Grey
Size: 196X126mm or 7.7X5 in
Compatible Printers: Elegoo Saturn V2 3D Printer

FAQs:

Do I need to make a Z-endstop adjustment for the BIQU resin 3D build surface?

No. There is no need to make a z-endstop adjustment. You just need to loosen the 2-hex screws while holding the ball joint to keep it in place and level the printer as you do normally (adjusting the recommended distance between the nozzle and the build surface so that the nozzle won’t scratch it while printing.

Is the BIQU resin magnetic build plate durable?

Undoubtedly yes. The BIQU Resin Build Plate And Magnetic Sheet is not only durable but also has all the features that you need in a build surface. For example, it is heat resistant, flexible, removable, super adhesive, etc. If you level the printer correctly and clean the build sheet with the recommended cleaning agent, you won’t need to replace it very soon.

Do I need to print a z-spacer for ELEGOO Saturn?

You need to install the z-spacer only once while installing the magnetic build sheet on your printer. Later on, it will home the flex plate perfectly.