FYSETC 3D Printing Build Surface Double Sided Textured Pei Spring Powder Coated Steel Sheet Flexiable Build Plate 300 x 300mm for 3D Printer TAZ 6

Description

Features:

Model: Double Sided Textured PEI Powder Coated Spring Steel Sheet

Size:
300*300mm(With magnets)

Material: PEI powder coated hardened steel spring sheet

Filament Material Compatibility: PLA ABS PETG TPU PVA, and so on.

Advantage:
(1) Two-in-one type of PEI powder coated type make it more easy to use
(2) Easy to take off the models by bending or popping it off
(3) Material Compatibility range is wide, almost the entire filament is Compatible
(4) Durable hardened steel helps lower running cost especially for long time printing
(5) Make it imaginable to add inductive Z-probe and add ABL for some printers wish to be upgraded

Maintenance:
(1) Wipe the print surface before and after a print with isopropyl alcohol to keep the surface clean
(2) Be sure that the distance between nozzel and surface is far enough to offer protection to the surface being scratched
(3) If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the prototypes from the bed

Package includes:
1PC*steel sheet

After-sales Guarantee:
Replacement and refund application for any detective item will be acceptable.
Further needed, please feel free to email or Q&A us, we and our engineers are very happy to assist you.

Make sure this fits by entering your model number.
Upgrade Spring Steel Sheet: Compatible with 300mm x 300mm hot bed/build plate, TAZ Workhorse, TAZ Pro, TAZ 6, TAZ 5, TAZ 4, TAZ 3, may fit A8 plus, et5 and et5 pro. !!!Please measure your bed, not rely on build volume/printing size.
Size: 300mm x 300mm/11.8*11.8 inch. It’s a stainless steel plate with double-sides special coating(PEI), which makes the bottom of the model show a textured mattle finish.
Two-in-one type of PEI powder coated hardended steel spring sheet, not easy to get desformed. It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, in addition to many other filaments. If you wish to have more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they’ll wash off with water after use.
Easy to install, take off the back paper on the magnetic base, stick it to the heated bed, then align the steel plate on it. The model may also be easily removed by bending the plate when the bed temp cools down. It is imaginable to add inductive Z probes and add ABL printers for certain objects that wish to be upgraded.
To clean, use some isopropyl alcohol after each use to keep contaminants away. If you ever wish to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol. For PLA and PETG we recommend 70° C bed temperature.