SOOWAY Flex Magnetic Two layer Build Surface

SOOWAY Flex Magnetic Two layer Print Hot Bed Sticker Build Surface is a hand-fetched, long-lasting, and premium quality product. Its super flat and smooth surface allows extremely strong adhesion to a number of filament materials and effortless removal of the 3D models once it cools down sufficiently.

Categories: Accessories, Build Platforms

Description
Reviews (0)

Description

SOOWAY Flex Magnetic Two layer Build Surface Print Hot Bed Sticker is double layered magnetic build sheet known for its supreme adhesion property and durability.

The upper sheet (A) is the actual magnetic build surface to adhere and hold the 3D models while the bottom sheet (B) is 3M adhesive and magnetic. To install it, you will tear off the gum on Sheet B, paste it to the hotbed, adsorb Sheet A onto sheet B, level the printer, and your printer is ready to generate 3D prints.

It is made up of composite magnetic material and cannot tolerate hotbed temperatures above 80 degrees Celsius. Therefore, the best material to be used on this build surface is PLA.

Lastly, the SOOWAY Flex Magnetic Two layer Build Surface is customizable. You can cut it to any size depending on your printer’s build dimensions.

Technical Specifications:

Brand: SOOWAY
Color: Blue
Size: 220mm
Max. Temp. Tolerance: 80°C
Product Material: Composite Material
Product Name: Soft Magnetic Sticker
Compatible Filaments: PLA, TPU, Carbon Fiber, and Wood

FAQs:

Is the SOOWAY Flex Magnetic Two layer Print Build Surface durable?

Yes. SOOWAY Flex Magnetic Two layer Build Surface is made up of composite material (rubber, magnet, and PC) and will last until it is scratched physically.

Can I print with PETG with SOOWAY Two layer Print Hot Bed Sticker Build Surface?

Theoretically yes and practically no. The maximum temperature tolerance of SOOWAY Flex Magnetic Two layer Print Hot Bed Sticker Build Surface is 70-80 degrees Celsius while PETG requires hotbed temperatures above 200 degrees, which would clearly damage the surface.

What’s the best way to clean the SOOWAY Flex Magnetic Two layer Print Hot Bed Sticker Build Surface?

The best way to clean SOOWAY Flex Magnetic Two layer Build Surface is to use 99.9%IPA or heat up the beg and gently remove the filament residues using a flat device.