Creality CR-10 S5 Review: Great Printer for Large Models

Creality is arguably the number one brand for budget-friendly 3D printers. Its collection includes devices that will suit professionals and experienced hobbyists. In this post, we’ll focus on the Creality CR-10 S5 from Creality’s CR-10 series.


The Creality CR-10 S5 is the largest 3D printer in the CR-10 series. This device is designed for printing huge models. The design of the Creality CR-10 S5 is not very different from others in this series. However, a few differences make the CR-10 S5 stand out.

Like other models in the CR-10 series, the S5 is solid and made with high-quality materials, including an aluminum frame. The CR-10 S5 features dual lead screws and bed rails that make it sturdy.

Creality CR-10 S5 Review: Great Printer for Large Models

The Creality CR-10 S5 3D printer comes semi-assembled; it will take about 10-15 minutes to finish the assembly process. This time depends on your familiarity with 3D printers. This device does not come with automatic bed leveling, which can be tricky since it has to be done manually. However, it’s pretty easy if you follow the instructions.

Note: Setting up the print bed is the most complicated part of assembling it.

Build Volume

The CR-10 S5 has a large build volume with a dimension of 500 x 500 x 500 mm. This printer is ideal for huge models. All you have to do is ensure your design fits the build volume. The CR-10 S5 has an XY resolution of 100 microns and a layer thickness of 100 microns, giving you high-quality prints.

Creality CR-10 S5 Review: Great Printer for Large Models

Build Plate

The CR-10 S5 has a tempered glass print bed that heats up quickly. This glass print bed lacks adhesion, so3 be careful when removing your prints. The CR-10 S5 glass print does not heat up evenly due to its size, and this can affect printing.

Build Speed

Creality designed the CR-10 S5 with a print speed of 180mm/s. The CR-10 S5 comes with different nozzles that can be switched. This device features an upgraded 0.4 mm MK10 nozzle. The 0.6 mm or 0..8 mm nozzle is ideal for less detailed models and increases print speed. The maximum nozzle temperature is 250 C.


The Creality CR-10 S5 has dual lead screws and two Z-axis stepper motor drivers designed to improve print quality. These stepper drivers help reduce shakes and movements.


Creality designed the CR-10 S5 with some safety features. The first is the resume printing feature intended to promote your models when the power goes off abruptly. This feature ensures that printing continues where you left off, and you don’t have to start again. This 3D printer is also designed with a filament run-out sensor, which is useful given the size of models the CR-10 S5 can print. This feature not only detects when you have run out of filament, but it will also resume where printing is left off.

The Creality CR-10 S5 features an upgraded circuit board to improve printing stability. This upgraded circuit ensures the CR-10 S5 can print for 200 hours without pause. This is ideal given that the CR-10 S5 is meant for more extensive and detailed models, which will require a long printing time. This device also has a top-notch bearing system that provides stability and reduces noise.

Creality CR-10 S5 Review: Great Printer for Large Models


The Creality CR-10 S5 printer is compatible with different slicing software like Cura and Repetier-Host. This device is also compatible with popular operating systems like Windows, Linux, and macOS. The CR-10 S5 works with AMF, STL, and OBJ file types. This printer can be connected via a USB port or SD card.


The Creality CR-10 S5 3D printer works with different filament types, including ABS, PLA, PETG, and Wood. It also works with third-party filaments.


You’ll find the Creality CR-10 S5 3D printer at various online stores:



  • Print Size: 500mm x 500mm x 500mm (19.7″ x 19.7″ x 19.7″)
  • Print Accuracy:±0.1mm
  • Nozzle: Brass 1.75mm x 0.4mm (can be swapped out for 0.3mm or 0.2mm)
  • Max Print Speed: 200mm/s
  • Max Hot end Temp: 240°C-245°C
  • Max Bed Temp: 80°C
  • Supported Materials: ABS, PLA, TPE
  • Body Structure: Imported V-Slot Aluminum Bearings.
  • Feed System: Bowden
  • Bed Leveling: Automatic, via CR Touch
  • Connectivity: USB or SD card
  • Supported OS: Windows, Mac OSX, Linux
  • Supported Slicing Software: CURA, Simplify3D
  • Firmware: Repetier-Host
  • Weight: 17.5kg (38.6 lbs.)

Leave a Comment

Submit Your 3D Printer Ratings

Join our community and share your feedback and ratings based on your experience with 3D Printers

Item added to cart.
0 items - $0.00
Compare Product