eSUN – Black Matte PLA Filament

Categories: Filaments, PLA Tags: Filament, Materials, PLA

Description

eSUN Matte PLA Filament 1.75mm, Low Density Matte 3D Printer PLA Filament, 1KG Spool 3D Printing Filament for 3D Printers

What is Matte PLA Material?

Based on regular PLA, Matte PLA has a matte surface effect with no obvious layer lines. It has a lower density and saves 21% filament on the same printing model than other PLA filaments. It isn’t easy to break or crack. The toughen structure is easy to peel off and the printed surface is not scratched.

Specification of Matte PLA:

Material: PLA (Polylactic Acid)
Diameter: 1.75mm
Weight: 1KG
6 Available Colors: Milky White, Dark Gray, Mint Green, Peach Pink, Almond Yellow, Deep Black

Recommended Printing Parameters:

Printing Temperature: 190-230℃ (Recommended Temperature 215℃)
Bed Temperature: 45-60°C
Fan Speed: 100%
Printing Speed: 40-100mm/s
Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI

Vacuumed Sealed Packaging:

Antioxidants + Vacuum Packaging + Product Manual
eSUN filament comes in a sealed vacuum bag with desiccant bag, easily keep your 3D printer filament at an optimal storage condition and free from dust or dirt.

How to Storage:

1. If you’re going to leave your printer inactive for more than a few days, please retract the filament to give protection to your printer nozzle.
2. So as to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place after print.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly when you use it next time.

Please Notice:

The picture shown is a representation of the item, color may vary fairly because of the color setting of each individual monitor. Please double check the size and color before purchasing.

Make sure this fits by entering your model number.
【Delicate Matte PLA】With excellent matte printed surface, eSUN Matte PLA has better printing effect and doesn’t have obvious layer lines than normal PLA. Not easy to break. Supporting structure of it is easy to peel off. Please check “Product guides and documents ” for more information about matte PLA filament printing.
【High Toughness & Low Density】Compared to normal PLA filament, eSUN Matte PLA has lower density and higher toughness.For same printed models, Matte PLA can print 21% more than normal PLA and models don’t seem to be easy to break or crack, which can be widly used in accessory, home decoration, toy, sculpture, shell and COSPLAY.
【Stable Dimensional Tolerance】Minimum tolerance and low warping to make sure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and are highly precise.
【Tangle Free & No Plugging】Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.
【Environmental Friendly Package & Reel】Scrap is reused to produce recyclable spool and packaging box. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.