MG Chemicals Wood 3D Printer Filament, 2.85mm, 1 Kg (2.2 lbs.) – Wood (WOOD30W1)

Description

MG Chemicals Wood filament is made with a blend of Poly-lactic acid (PLA) and 20-25 percent poplar Wood particles. This material may also be sanded and painted and has a sweet odor of Wood. It has the ease of use similar to PLA and is great for artists and hobbyists who need to experiment with different printing materials. It is pretty much a drop in replacement for regular PLA and is quickly becoming a favorite to print with. Printing temperature ranges from 185° – 230° C (365°- 446° F). slowing down the print speed to 50 percent -60 percent will make stronger the smoothness of your print. Varying temperatures will have an effect on the color of the final product. No heated bed is required. It is highly recommended this product be used with 0.5 mm nozzles or larger to avoid clogging. Alternatively, nozzles as small as 0.35mm are being used with great success, from time to time the usage of higher heat to avoid clogging. Try to avoid letting the filament sit in the hot end for any length of time even as it is hot, as this tends to cause clogging. Wood fibers collect at the tip when left sitting in the hot end. Once it is printing keep it going. If you need to stop to do adjustments etc either pull the filament out of the hot end or let it cool down till you are ready to start printing again. These extra few steps will save you a world of time.

Make sure this fits by entering your model number.
Wood/PLA blended filament
2.85 mm diameter, Wood filament, 1 kg net weight
Suggested print temperature ranges from 185°C to 230°C (365°F-464°F)
Diameter tolerance: 2.85Mm: 2.85+/-0.1Mm
Compatible with all fused-filament 3D printers models (sold one after the other)