Monoprice ABS 3D Printer Filament – Bright Orange – 1kg Spool, 1.75mm Thick | For All ABS Compatible Printers

$29.99

Monoprice ABS filament is a versatile and cost-effective filament for 3D printing with high tensile strength and good toughness. It features a thickness of 1.75mm ±0.10mm and roundness variation of only 0.05mm, ensuring accuracy over the entire length of the filament.

Categories: ABS Filament, Filaments

Description

Monoprice ABS 3D Printer Filament – Bright Orange – 1kg Spool, 1.75mm Thick | For All ABS Compatible Printers

Experience exceptional 3D printing results with Monoprice’s 1.75mm ABS 3D Printer Filament.

ABS, or Acrylonitrile Butadiene Styrene, is a widely used filament in the 3D printing industry due to its high tensile, strength, and overall durability.

Its low density and softer texture than PLA makes it a cost-effective option for printing larger models.

The filament has a hardness that prevents any white dot from appearing when bent.

Each 1 kg spool has a thickness of 1.75mm ±0.10mm, and a roundness variation of only 0.05mm, which are laser measured at the factory for accuracy throughout the entire filament.

Keep in mind that ABS can produce a white smoke with a strong odor during printing and it’s recommended to have a well-ventilated room when using it.

Additionally, ABS has a high moisture absorption rate, so it is recommended to use silica gel or an active dehumidifier when storing it and not to open the spool until you’re ready to print to prevent bubbles or pocks in the extrusion.

Specifications:

Brand: Monoprice
Filament Material: ABS (Acrylonitrile Butadiene Styrene)
Net Weight: 1kg
Filament Diameter: 1.75mm (±0.05mm)
Printing Temp.：230℃～240℃
Color: Bright Orange
Package Type: Vacuum package

FAQs

How can I prevent warping and shrinking when using this filament?

You can use a heated build plate or using a cooling fan to cool the filament as it extrudes. Increasing the perimeter width can be tried also to ensure proper adhesion.

Why is my filament not sticking to the build plate?

There are few reason for this that include:
1. The build plate may not be heated enough
2. The build plate may not be properly leveled
3. The filament may be too cold
4. The build plate may not be clean