Polymaker ABS Filament 2.85mm Blue ABS, 1kg Spool Heat Resistant ABS Filament 2.85 – PolyLite ABS 3D Printing Filament

Polymaker 2.85mm Blue ABS Filament, 1kg Spool | Heat Resistant ABS Filament

$21.99

Polymaker 2.85mm Blue ABS Filament has good mechanical properties, high strength, and durability. It is UV-resistant and therefore can be used for printing outdoor and automotive indoor objects.

Categories: Filaments, ABS Filament

Description

Polymaker 2.85mm Blue ABS Filament is durable, jam-free, and highly heat-resistant (Vicat Softening Temperature: 104˚C). Its premium quality construction enables it to withstand outdoor experimental conditions and therefore can be used for creating functional parts such as door handles, etc.

For printing with the Polymaker Blue ABS Filament, you need to ensure the following printer settings:

Nozzle: 245˚C – 265˚C
Bed: 90˚C – 100˚C
Speed: 30mm/s – 50mm/s
Bed Surface: BuildTak, PEI sheet with ABS slurry
Cooling Fan: LOW for better surface quality and OFF for better strength

Moreover, the Polymaker 2.85mm Blue ABS Filament offers no tangles, no jamming, no strings, zero-layer issues, zero adhesion, and zero warping, and all these features will help you get your dream 3D prints.

Last but not least, the Polymaker 2.85mm Blue ABS Filament features Speciality Bulk Polymerized Resin” which is known for its environment-friendly features (least odor, easy degradation, etc.). It also gives it its specific consistent color and dimensional accuracy to prepare flawless 3D models for you!

Technical Specifications:

Brand: Polymaker
Material: ABS
Color: 2.85mm Blue
Vicat Softening Temperature: 104˚C

FAQs:

What to do to avoid model warping with the Polymaker 2.85mm Blue ABS Filament?

To avoid model warping while printing with the Polymaker 2.85mm Blue ABS Filament, you can use a raft or brim. Lowering the speed for printing the very first layer of the model will also prevent print warping.

Is a closed chamber mandatory for printing with the Polymaker 2.85mm Blue ABS Filament?

Yes. A closed chamber and a heated bed are mandatory for printing with the Polymaker 2.85mm Blue ABS Filament. It will help in better adhesion of the filament to the build plate and gives a warp-free perfect first layer.

Do I need to use any additional adhesive for improving the adhesion capacity of the Polymaker 2.85mm Blue ABS Filament?

Mostly, you do need any adhesive material for improving the filament adhesion to the build surface. However, if you face such an issue, you can use ABS slurry in that case.