SainSmart – TPU-WHT-0.25KG1.75 SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm…

Description

 

OVERVIEW

SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber.

95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill.

In comparison with most common filaments like PLA and ABS, TPU should be run much slower.

SPECIFICATION

– Material: Rep-Flex TPU – Vacuumed Sealed with desiccant
– Shore Hardness: 95A
– Weight: 250g Spool
– Diameter: 1.75mm (+/- 0.05mm)
– Really useful extruder temperature:195 – 230°C
– Really useful platform temperature: 40 – 60°C

PRINTING TIPS:

Really useful for printers with direct drive extruder, 0.4~0.8mm Nozzles.
With bowden extruder you might pay more attention to these tips:

– Print slow 15-30 mm/s Printing speed
– First layer settings. (Height 100% Width 150% speed 50% e.g.)
– Retraction disabled. This would reduce messy, stringing or oozing printing result.
– Increase Multiplier(Optional). set to 1.1 would help the filament bond well. – Cooling fan on after first layer.

In case you are having problems printing with soft filaments, first of all, and most importantly, slow the print down, run at 20mm/s will work perfectly.

It is crucial when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear.

Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I

WHAT’S IN THE PACKAGE

1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed)

Make sure this fits by entering your model number.
Approximately 250 grams, feet of filament on a spool with a case so it isn’t flopping everywhere. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Remember to are ordering the correct diameter for your printer. This product is only to be had in 1.75mm.
Specially formulated plastic with increased amount of flexibility, with rigid structure. Really useful for printing objects, in an effort to be impacted more than normal ones.
SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Really useful for printing objects, in an effort to be impacted more than normal ones.
Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only to be had in 1.75mm diameter.
It’s better to work on direct drive extruders. Please print slowly and read the tips In case you are bowden.