Sunlu – Black, Gray PLA Filament

Description

These 1.75mm PLA+ filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, eco-friendly and secure, with no odor all through the printing

Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if in case you have any issues or questions, we can make every effort to provide you with immediate help until you are satisfied.

FAQs:

Why can’t the filaments stick to the build bed?

1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature;

2. Check if the plate surface has been used for a very long time, it is recommended to replace it with our new one to verify an strong first layer adhesion;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

4. If the effect is not good, it is recommended to check out printing the draft before printing.

Specification:

Temperature

Recommended Extrusion/Nozzle Temp: 190°C – 220°C (374℉~ 428℉)，

Heated Bed Temp: 25°C – 60°C (77℉~ 140℉)

Filaments Diameter and Accuracy: 1.75 mm +/- 0.02mm

Filaments Net Weight: 1 kg (2.2 lbs)

Packaging Included:

1 × spool of PLA filaments

Make sure this fits by entering your model number.
Toughness Enhanced PLA Filaments – SUNLU premium PLA filaments have the advantages of implausible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
Dimensional Accuracy & Consistency -These tough PLA filaments to be strict tolerances. Diameter 1. 75mm, dimensional accuracy + / – 0. 02 mm without any exaggeration; 1 kg spool (2. 2lbs)
Clog-Free, Bubble-Free & Easy-to-use – Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-230℃, bed 70℃ .
Wide Compatibility – Works and harmonizes perfectly with all common 1. 75mm FDM 3D printers, thanks to the top quality standards on the subject of manufacturing accuracy and the small tolerance in diameter of +/- 0. 02mm.
Risk-Free – One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8″ – Spool Width: 2. 5″ – Spool Hub Hole Diameter: 2. 20″