Chul hsin LCD/DLP photosensitive Resin Universal Material Optical Curing 3D Printer Supplies high Hardness, high…

Description

Caution !
Notes on use.
Shake well before use, forbid to use resin in places with numerous sunlight.
Not to be taken orally, keep away from children, wear gloves before use, avoid direct contact with skin, keep indoor ventilation.
Do not get into eyes, if inadvertently contacted, flush with a number of water as soon as conceivable.
In case of discomfort, seek medical attention.
Wash the finished resin model with high concentration of alcohol (95% concentration or more is recommended, the higher the better) for about 30S.
Do not pour the used resin back into the unused resin in the tank, and do not leave the resin in the tank for a very long time without the use of it.
（Do not leave the resin in the tank for a very long time without the use of it (for a very long time, the resin may also be stored in a container with a plastic film to avoid contamination of the resin and impact the printing effect.
Storage method.
Store at room temperature away from light, sunlight contains ultraviolet light, to be able to cure the photosensitive resin, tested under the light is not ultraviolet light has no effect.
It is recommended to store at an ambient temperature of 15 ℃ to 35 ℃, the lower the temperature, the higher the resin viscosity.
Seal the resin to avoid excessive dust or moisture, to be able to impact the print quality.
How to make a choice.
LCO machine to make a choice the resin should first know the wavelength of the light-emitting lamp, because the resin curing frequency corresponds to different wavelengths, if the two do not match, it can not be used.