DOUMII Water Washable 3D Resin – 405nm UV Cured 3D Printing Resin, for LCD 3D Printers, Easy to Clean and Cure, Fast…

$29.99

Categories: LCD Resin, Materials, Resins, Water Washable Resin

Description

Fast Curing

DOUMII water washable resin could reduce the curing time to a minimum of 2 seconds. (Depends on the model you print, the parameters setting and the LCD quality)

DOUMII Water Washable Resin

Really helpful Setting:

Bottom Exposure Time: 40s-60s

Normal Exposure Time: 2s-8s

The Setting Depends on the model you print, the parameters setting and the LCD quality.

Resin Parameters:

1.Hardness 78-82 D；
2.Viscosity (25°C): 100-350 mPas
3.Liquid Density: 1.10-1.12 g/cm*
4.Tensile modulus (MPa):1200-1250
5.Elongation at break (%): 14-16%
6.Flexure Strength: 34-36 Mpa
7.Tensile strength: 26-28 Mpa
8.Shrinkage (%):1.5-1.6

<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”But even so, it has no pungent odor.

Well Compatibility

DOUMII water-washable resin in widely used in most DLP/LCD 3D printer, specially for 405nm wavelength light source, such as Anycubic Photons, Elegoo Mars, and so forth.

3. Wear gloves and mask before use, steer clear of contact with skin and eyes

4. If inadvertent contact, rinse with a lot of water asap, If you are feeling unwell, are trying to find medical professional immediately.

5. When printing, make sure the room is ventilation and steer clear of sunlight or any light source which has about 405nm wavelength.

6. Really helpful exposure setting: First layer exposure 20-40 seconds, normal exposure 2-10 seconds.(when the layer thickness is 0.05mm)

7. DO NOT dump waste water directly. Cure the waste water with sunlight and then filter the residue before dumping

Storage:

1. Avoid sunlight at room temperature (Really helpful at 15 ℃ -35 ℃ ambient)

Sealed storage, excessive dust or moisture can have an effect on print quality, Avoid children.

Make sure this fits by entering your model number.
Water Washable – Doumii 3D Resin could be washed easily by water instead of 95% ethyl alcohol，save your money, save your time.
Excellent Fluidity – The formula of Doumii 3D printing resin has been optimized for Low Viscosity which could shorten curing time and being easy for cleaning the vat and the miniature.
Well compatibility – Doumii 3D UV Resin is designed for DLP/LCD 3D printers, specially for 405nm UV-cured LCD 3D printers such as Anycubic, Elegoo and and so forth.
High Quality – No pungent odor, High Precision & Low Shrinkage, has good combination of hardness and toughness.
Well packaging – Thickened aluminum bottle has the cap with no sharp edge, to prevent you from hands cuts.

Additional information

Color	Clear

Reviews

There are no reviews yet.

Be the first to review “DOUMII Water Washable 3D Resin – 405nm UV Cured 3D Printing Resin, for LCD 3D Printers, Easy to Clean and Cure, Fast…”