IFUN 3D Rapid Resin Low Odor LCD UV-Curing Resin 405nm Fast Curing Standard Rigid Photopolymer Resin Liquid Pink 500g

Make sure this fits by entering your model number.
1.Extra 50g in a bottle: In order to reduce the occurrence of material shortage when printing large-size model, we add extra 50g in a bottle but keep same price
2.Friendly Resin: We insist using environmental-friendly raw materials,ensuring low odor and low PII. And our main raw material have passed REACH!

Categories: LCD Resin, Low Odor Resin, Materials, Resins, Rigid Resin

Description

IFUN 3D Printer Resin 405nm Aromatic Mint Odor LCD DLP SLA UV Cure Rapid 3D Print Standard Rigid Photopolymer Resin Liquid

*Lab test approved with MSDS & RoHS certificate.
*To make sure the great stability of 3D printing model, IFUN choose Polyurethane as raw material reasonably than Epoxide Resin.
*To make sure the personal safety , although there is low odor with Polyurethane, IFUN would reasonably choose Polyurethane than add BPA(Bisphenol A) which is found to be detrimental to human health.

Storage:
Keep away from sunlight & seal at room temperature.
It is strongly recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin.
Sealed storage, excessive dust or moisture can impact print quality.
Sunshine contains a large number of UV light, will solidify photosensitive resin.
Usage:
Shake well before use, Avoid direct sunlight
Do not drink it and keep out of the reach of children & pet Wear gloves to avoid direct skin contact and keep the room ventilated.If feel discomfort after skin contact, please are looking for timely medical attention.
Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least.
If you do not use the resin please do not leave them in the resin tank over 48 hours.

Make sure this fits by entering your model number.
1.Extra 50g in a bottle: With the intention to reduce the occurrence of material shortage when printing large-size model, we add extra 50g in a bottle but keep same price
2.Friendly Resin: We insist the use of environmental-friendly raw materials,ensuring low odor and low PII. And our main raw material have passed REACH!
3.No Cracking: Low shrinkage rate（≤1%）Won’t appear warped edge and Cracking phenomena. Even large-size model printing keep good printing details
4.Wide Applicability: After hundreds of tests on different brand 3D printer, we confirm that our resin are suitable for most brand LCD printer
5.High precision: Professional testers can print a minimum of 0.01mm supporting and even a new can print out 0.03-0.05mm