Molazon Standard Rigid Resin 3D Printer UV Resin, 405nm LCD DLP UV-Curing with High Precision Low Viscosity Fast Curing…

Description

Standard Rigid Resin

Basic Parameters:

Applicable wavelength: 405nm

Viscosity (@25℃): 360±30cps

Liquid Density (@25℃): 1.05~1.25g/cm³

Bending Strength: 35~55MPa

Tensile Strength: 70~85MPa

Hardness (Shore): 95D

Wavelength: 405nm

Volume Shrinkage: 1.6~2%

Elongation: 102~105%

Resistance: 70~80℃

Best Printing Temperature: 25~28℃

Storage Temperature: 5~30℃

Net weight: 1.151KG/Bottle

Gross weight: 1.30KG/Box

Box size: 12x12x29cm

Setting:

RGB LCD 3D Printer:

Layer Height: 0.025~0.05mm

Layer Exposure: 6s~9s

#OF Initial layers: 5~7

Exposure for initial layers: 60s~100s

MONO LCD 3D Printer:

Layer Height: 0.025~0.1mm

Layer Exposure: 2.5~5

#OF Initial layers: 5~7

Exposure for initial layers: 30~70

DLP 3D Printer:

Layer Height: 0.025~0.1mm

Layer Exposure: 2.5~5

#OF Initial layers: 5~7

Exposure for initial layers: 30~70

Note: Room temperature 20-28℃

Note:

1.Please shake evenly for 1-2 minutes before use to avoid imaginable sedimentation of resin components.

2.Please wear mask and gloves when the use of it to avoid direct skin contact.

3.Indoor storage in a dry ventilated place free from any sun exposure or moisture.

4.Wash your skin and clothing with soap & water immediately if the resin contact with your clothing by chance.

Make sure this fits by entering your model number.
【High Precision & Low Shrinkage】Molazon Standard Resin (395nm ~405nm) contains methacrylate monomers as to reduce volume shrinkage right through the photocuring process , which ensures the high precision of the print model with smooth finish.
【Excellent Fluidity & Great Stability】Molazon resin shows great stability after curing, the formed model is not easy to shrink, with high stability and exquisite & smooth surface texture, every detail is delicate, offers you improbable printing experience.
【High Precision】Molazon resin was designed to reduce volume shrinkage right through curing, ensuring the high precision and excellent accuracy of the printer model. Volume: 1000ml/ 1151g.
【Professional for LCD】Molazon resin was designed for LCD DLP 3D Printers (Special for LCD models), low shrinkage rate and higher molding rate.
【Protected Package】Thickened Aluminum bottle completely secure from light. Leak-proof bottle fully wrapped with a plastic bubble bag to ensure the resin stays in place where they belong. The rigid resin is suitable for animation resin kit, craft decoration, artistic creation, architectural model, scientific research experiment, education and teaching and and the like.