SainSmart – 101-90-840TS Rapid UV 405nm 3D Printer Resin for 3D LCD Printing, General Purpose Photopolymer Curing Resin…
$23.99
Make sure this fits by entering your model number.
Rapid UV curing ensures the strength of printing parts and lowers the shrinkage rate. This resin provides you both high toughness and hardness prints.
The general-purpose resin is compatible with most LCD printers on the market that use 405nm wavelength light. Including EPAX X1, Any cubic Photon, Photon2, WanHao D7, and other LCD printers.
Description
Overview
SainSmart 3D Resin is a liquid printing material for SLA/LCD printers. Its high precision and cost effectiveness
make it a useful material, also beloved by the 3D printing fans. This resin lets you print a model with extremely
fine detail, far more than a standard filament printer can produce, and the end result has a tendency to need far less post-processing
work to provide you with a finished product.If you’re working with SLA/LCD printers, SainSmart Resin will definitely worth trying.
Specification:
Volume: 1000g
Color: Transparent
Curing Wavelength: 395nm to 405nm
Hardness (D): 88D
Viscosity (25C, mPa.s): 100 to 150 mPa.s
Density: 1.07 to 1.12 g/cm3
Shrinkage of Vol.: 3.72%-4.24%
Flexural Strength (Mpa): 59Mpa to 70Mpa
Flexural Modulus (Mpa): 1.88 to 2.38
Tensile Strength (Mpa): 35Mpa to 42 Mpa
Elongation at Break (%): 11% to 20%
Recommended Parameter Settings:
Photon & Wanhao D7:
Number of Base Layers: 8
Base Layer Curing time: 60s
Normal Layer Curing time: 10s
Beam3D Prism:
Number of Base Layers: 8
Base Layer Curing time: 55s
Normal Layer Curing time: 8s
Storage Tips:
1) Steer clear of light and sealed at room temperature.
2) It is suggested to store the resin between 15 Celsius and 35 Celsius in its original container.
3) Steer clear of any dusty or moist environment.
Note: Please shake well before use for better prints.
WHAT’S INCLUDED?
1 x SainSmart Rapid UV 405nm 3D Printer Resin-1000g Transparent
Make sure this fits by entering your model number.
Rapid UV curing ensures the strength of printing parts and lowers the shrinkage rate. This resin provides you both high toughness and hardness prints.
The general-purpose resin is compatible with most LCD printers available on the market that use 405nm wavelength light. Including EPAX X1, Any cubic Photon, Photon2, WanHao D7, and other LCD printers.
SainSmart Resin is easy to detach after forming. Low viscosity makes it simple to clean your 3D printer.
Its performance is stable under room temperature conditions and secure to store. Also, with little odor, buy with confidence.
Great for making functional parts that have high precision and clear details. For better printing quality, we recommend the usage of the LCD light.
Related Products
-
Ultimaker 3 NFC ABS Filament – Green
Buy Now -
Superflex has Balanced Softness with Strength(Shore 80A) Simulating Rubber for Flexible Prototypes, Made in Korea for by…
$29.80 Buy Now -
PLA 3D Printer Filament Bundle – 1kg Spool
Buy Now -
ANYCUBIC 3D Printer Resin, 405nm High Precision Fast Curing UV Photopolymer Resin for LCD 3D Printing, 500g TL Green
$9.99 Buy Now -
LEE FUNG 1.75mm ABS 3D Printing Filament
Buy Now -
Reprapper 201 3D Printer Resin 405nm Fast UV-Curing Standard Photopolymer Resin for LCD 3D Printing Red Wax 500g
$20.82 Buy Now -
Fokoos – Silk Copper PLA Filament
Buy Now -
MG Chemicals – PLA17TL1 Translucent PLA 3D Printer Filament, 1.75 mm, 1 kg Spool
$30.19 Buy Now -
Monocure 3D Rapid Resin for Low Power UV 3D Printers 1L Gray
$79.99 Buy Now -
Amolen – 4 Color Pack PLA Filament Bundle
$26.99 Buy Now -
Sea Blue ABS Filament
$32.97 Buy Now -
Anycubic – PLA Filament
$14.99 Buy Now -
Rich-OPTO Water Washable LCD 3D Printer Resin UV Curing 405nm Quick Printing Speed Low Odor High Accuracy Photopolymer…
$25.99 Buy Now -
Eryone – Aqua Blue PLA Filament
$20.99 Buy Now
Reviews
There are no reviews yet.