RESIONE G217 Clear 3D Printer Resin ABS-Like Non-Yellowing Tough&Rigid Resin for DLP MSLA LCD 3D Printing (1000g)
$74.99
Make sure this fits by entering your model number.
【Clear】The raw materials of G217 resin are all clear and transparent. RESIONE strictly controls the production process, and no impurities remain in the raw materials. After sanding and spraying clear varnish or G217 resin, the print will become completely transparent (slightly bluish).
【Non-yellowing】Ordinary resin will slowly turn yellow over time, but G217 resin will not. G217 prints may turn yellow after post-curing, but will fade within a few days until the transparent color is restored.
Description
G217 is a clear(Reasonably blue), non-yellowing, tough resin. After sanding off the stratification on the surface of the prints, they’re going to become completely clear.
The wavelength range is 385-405nm, suitable for mainstream LCD/MSLA/DLP 3d printers on the market, such as: a full range of Nova3d, Longer3d, QIDI TECH, Phrozen, Creality, Anycubic, Elegoo resin 3d printers.
G217 Clear ABS-Like Resin
Printing Settings
- Layer Height(mm):0.05mm
- Bottom exposure time: 30-55s
- Normal exposure time: 2.3-13.4s
If you wish to have specific settings, please visit the RESIONE official website
Cleaning and Post-curing
- Cleaning tools: Soft brush or Ultrasonic cleaner or 2 in 1Wash Cure Machine
- Cleaning time: 2min
- Cleaning solvent:95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 2-4min
Notice!!!
- The print is translucent after cleaning.Sand the prints with coarse and fine sandpaper and spray varnish or G217 liquid, the print will become transparent.
- Resin liquid and prints are transparent but Reasonably bluish.
- After curing the prints under high-power UV light, the print may turn yellow Reasonably, but it is going to automatically fade within a few days.
Resin Parameters
- Shore Hardness:90D
- Tensile Strength:65.3MPa
- Flexural Strength:77.3MPa
- Elongation at Break:10.4%
- Viscosity(25℃):396mpa.s
- Notched IZOD:30.78J/m
|
|
|
---|---|---|
Clear(Reasonably blue)The raw materials of G217 resin are all clear and transparent. RESIONE strictly controls the production process, and no impurities remain in the raw materials. After sanding and spraying clear varnish or G217 resin, the print will become completely transparent (Reasonably bluish). |
Non-yellowingUnusual resin will slowly turn yellow over time, but G217 resin will not. G217 prints may turn yellow after post-curing, but will fade after a few days until the transparent color is restored. |
Sturdy like ABSThe mechanical properties of the G217 resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent affect strength. The prints can be machined repeatedly. |
<a href=”javascript:void(0)” data-csa-c-func-deps=”aui-da-a-expander-toggle” data-csa-c-type=”widget” data-csa-interaction-events=”click” aria-expanded=”false” role=”button” data-action=”a-expander-toggle” class=”a-declarative” data-a-expander-toggle=”throughout operation and keep the operating environment well ventilated.
- Do not use resin near windows, balconies or other strong ultraviolet environment.
- If you unintentionally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
- The resin remaining on the skin can be washed with soap, hand sanitizer, etc.
- Caution for people allergic to acrylics.
Waste liquid:
- If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
- If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You’ll put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used regularly.
Storage:
- Store in a sealed, shading, and cool place.
- Keep away from fire.
- Keep out of reach of children.
- If the resin is not used in the 3D printer for more than 1 day, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins.
Make sure this fits by entering your model number.
【Clear】The raw materials of G217 resin are all clear and transparent. RESIONE strictly controls the production process, and no impurities remain in the raw materials. After sanding and spraying clear varnish or G217 resin, the print will become completely transparent (Reasonably bluish).
【Non-yellowing】Unusual resin will slowly turn yellow over time, but G217 resin will not. G217 prints may turn yellow after post-curing, but will fade within a few days until the transparent color is restored.
【Sturdy like ABS】The mechanical properties of the G217 resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent affect strength. The prints can be machined repeatedly.
【High-quality raw materials】RESIONE only selects high-purity and low-irritating raw materials. No harmful substances remain.
【Wide adaptability】Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market.
Related Products
-
Sale!
Priline – Black PLA Filament
$16.99Original price was: $16.99.$14.99Current price is: $14.99. Buy Now -
RICH-OPTO 3D Printer Resin UV-Curing 405nm Rapid High Precision Quick Curing Standard Photopolymer Resolution Low Odor…
Buy Now -
Ultimaker 2+ Nylon Filament – Transparent
Buy Now -
SainSmart – 101-90-840TS Rapid UV 405nm 3D Printer Resin for 3D LCD Printing, General Purpose Photopolymer Curing Resin…
Buy Now -
Sale!
Flashforge White Water Washable LCD Resin (1000kg)
$25.99Original price was: $25.99.$12.99Current price is: $12.99. Buy Now -
SHENGTIAN Metallic Silver Matte PLA Filament
$18.99 Buy Now -
Black PLA Filament
Buy Now -
Flashforge – White ABS Filament
$26.00 Buy Now -
Octave Transparent ABS Filament for 3D Printers – 1.75mm – 1kg Spool
Buy Now -
Sale!
Anycubic – Red PLA Filament
$21.99Original price was: $21.99.$17.99Current price is: $17.99. Buy Now -
ELEGOO 3D Printer Resin 405nm LCD Fast UV Curing Standard Resin Photopolymer Resin High Precision Non Toxic Low Odor for…
$24.99 Buy Now -
ANYCUBIC 3D Printer Resin with Low Odor and Safety, 405nm UV Plant-Based Rapid Resin with High Precision and Quick…
$18.99 Buy Now -
Polymaker PolyCast Filament 1.75mm for Investment Casting 750g – 3D Printer Filament for Lost Wax Investment for Casting…
$49.99 Buy Now -
UNIZ zMUD 3D Printer Resin, High Precision Rapid Printing, 405nm Standard Photopolymer LCD UV-Curving Resin, Easy to…
Buy Now
Reviews
There are no reviews yet.