Mars Series Upgraded Magnetic Build Plate

Mars Series Upgraded Magnetic Build Plate is a flexible, removable, and durable 3D build surface. It is easy to install, offers strong adhesion, and allows the effortless removal of 3D models. Not only that, this build sheet is easy to clean and does not warp due to the frequent temperature fluctuations that a printer goes through.

Categories: Accessories, Build Platforms

Description
Reviews (0)

Description

Mars Series Upgraded Magnetic Build Plate is a 2-in-1 build platform with all the 3D printing features to make it a perfect replacement part for your 3D printer.

It consists of 2 sheets; the upper is a flexible, removable spring steel sheet that will adhere and hold the 3D models while the bottom one is a 3M adhesive magnetic sheet that will stick to the hotbed and hold the upper spring steel sheet.

Moreover, the Mars Series Upgraded Magnetic Build Plate is easy to install and requires 3 steps to follow; 1. Peel off the sticker from the bottom 3M adhesive sheet and stick it to the hotbed, 2. Adsorb the upper spring steel plate onto the pre-installed adhesive magnetic sheet, 3. Level the printer.

The Mars Series Upgraded Magnetic Build Plate offers excellent adhesion at low temperatures. It does not warp and does not let the model fall off once gets stuck.

You can use the Mars Series Upgraded Magnetic Build Plate for Elego Mar, Mars C, Mars Pro, Wanhao D7, Phorz Sonic Mini, Deluxe, and others having the same build dimensions.

Tecnical Specification:

Brand: BCZAMD
Color: Grey
Size: 135x75mm or 5.3×2.9 inch
Compatibel Printers: Elego Mar, Mars C, Mars Pro, Wanhao D7, Phorz Sonic Mini, Deluxe. Don’t fit for Photon Mono, etc.

FAQs:

How to use a magnetic build plate?

Magnetic Build Plates always come dual-layered, both are magnetic. The upper sheet is named sheet “A” and the bottom sheet is named sheet “B”. You will remove the sticker from sheet B and install it on a hotbed and adsorb sheet A onto sheet B (they will stick to each other due to magnetic force, if they don’t adhere, rotate sheet A to 90 degrees and try again).

What kind of printer is the ELEGOO Mars?

ELEGOO Mars 3D series printers are “Computer LCD 3D Printers.” This kind of printer uses an array of UV rays that penetrate through an LCD flashes complete layers at the resin tank and a screen masks the entire image and only reveals the current layer from curing.