FYSETC Resin Build Plate+Magnetic Sheet 135x80mm/ 5.3×3.inch 3D Printer Resin Flex Plate 2 in I Spring Steel Sheet Removable Build Platform Compatible with Anycubi Mono/Photon/Mono SE/ 3D Shadow 5.5S

Description

Package includes:
1 X 135*80mm Steel Spring Plate 1 X Magnetic Base with strong adhesive

Make sure this fits by entering your model number.
Resin edition: A necessary upgrade accessory for your Resin Printer, Never scrape parts again! from now on just Flex the plate to remove your print, adding both convenience and safety!
Size: 135 x 80 mm/ 5.3×3.1 inch, be sure the size selected will work on your machine. Measure your bed, do not rely on build volume. Compatible with Anycubi Mono, Photon, Photon S, Photon Mono, Photon Mono SE, Qid Shadow 5.5S
Top quality spring steel: The resin steel plate surface is treated with special wire drawing, and the adsorption force is stronger, so that the model can be better adsorbed.
Strong Adhesive: The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. Please clean your build plate with isopropyl alcohol to make sure there isn’t a resin or dust left on the surface, it must be clean and dry. After installing, please press from side to side again to make certain that there’s no gap between the build plate and magnetic base. 72 hours later, it’s going to achieve the best effect.
‼Please adjust the z limit switch after installation. It must be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You’ll find a spacer/nut and put it under the Z limit switch to compensate the difference. At the same time, be sure that the printing platform is in line with the cured screen, and the starting printing height is that of an A4 sheet of paper.