PopuSingTop 3D Printer Build Plate 255×245 mm Heat Bed Sticker for Creality CR-6 SE 3D Printer Platform Mat

Description

PopuSingTop 3D Printer Build Plate 245×255 mm Heat Bed Sticker for Creality CR-6 SE 3D Printer Platform Mat

Instructions:

The magnetic build surface is divided into two parts: A(upper)+B(lower)
Part A: The top is a matte surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role)
Part B: The top is magnetic (with the adsorption under the Apart), the back is the adhesive (posted on the printer platform, which plays a fixed role)
If it fails to adsorb, please rotate it 90 degrees and take a look at again.

How to use:
To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you are prepared for the next round of printing.

NOTE:
1.The products are rated to be used with PLA filament ONLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force through the years. This will NOT prevent prints from warping.
2. The products aren’t to be used with high-temperature printing applications above 80 degree.

Package included: 1set magnetic build surface.

Make sure this fits by entering your model number.
Compatible: The Build Plate is applicable with Creality CR-6 SE. Product Size: 245mm x 255mm. Not fit ender 3 ender 5 series
Easy to stick: The surface of black frosted with coarse sand design has strong flexibility and makes it easy to stick and get rid of the model.
About Magnetism: If it fails to adsorb, you’ll be able to adjust the upper part to find a better direction of magnetism.
Working Temperature: It can work under 80 ℃. Differently it’ll have an effect on the stability of its working seriously.
Package include: 1 set 245x255mm magnetic build plate (Part A and Part B). Compatible with PLA, wood, PCL and TPU Flexible filaments, not ABS and PETG.