HICTOP Resin Magnetic Flexible Steel Plate Flex Bed for ANYCUBIC Photon, Photon S, Photon Mono, Photon Mono SE, Qidi Shadow 5.5S SLA 3D Printer 5.3X3.15inch 2 Packs (135x80mm)

HICTOP Resin Magnetic Steel Plate

$13.59

HICTOP Resin Magnetic Flexible Steel Plate is easy to install, clean, and use. It allows excellent adhesion to the 3d models and effortless removal at the completion of printing. Not only that, it is corrosion-proof, long-lasting, and removable.

Categories: Accessories, Build Platforms

Description
Reviews (0)

Description

HICTOP Resin Magnetic Steel Plate is made up of premium quality chromium to make it corrosion-resistant, scratch-proof, and durable. It is kept easy to install for the ease of novices.

It is a dual-layered platform, sheet A is spring steel and magnetic while sheet B is magnetic and adhesive. For its installation, you will peel off the 3M adhesive tape from the back of sheet B and stick it to the hotbed.

The next step is to adsorb sheet A onto sheet B (if it doesn’t, rotate the sheet to 90 degrees and try again), adjust the z-limit height of the printer and it will be all set to generate your dream 3D models.

The HICTOP Resin Magnetic Steel Plate allows excellent adhesion due to its super-flat and adhesive surface. When it’s time to take off the prints, this steel plate is again matchless. It allows hassle-free removal of the 3d models at cooling down to room temperature.

Moreover, the HICTOP Resin Magnetic Flexible Steel Plate is durable and allows repeated printing. It is easy to clean with the dishwasher and water. Do not use any organic solvent to clean the surface as it would damage its coating.

Technical Specifications:

Brand: HICTOP
Color: Black
Size: 5.3X3.15 inch or 135 * 75mm
Package Includes: 2 X light curing/DLP printing spring steel plate + 2 X soft magnetic sheet + 1 X Instruction
Compatible printers: ANYCUBIC Photon, Photon S, Photon Mono, Photon Mono SE, Qidi Shadow 5.5S SLA 3D Printers

FAQs:

How to adjust the z-limit switch of a resin 3d printer?

To adjust the z-limit switch for a resin 3d printer, the first step is to loosen the bolts on both sides of the frame of the printer to slide the z-axis limit as recommended by the manufacturer in the user manual. Then tighten the screws and your printer will be ready for printing.

Can I use alcohol to clean the HICTOP Resin Magnetic Steel Plate?

Yes. Alcohol is safe for magnetic and glass to build surfaces as it does not dissolve the surface coating. Therefore, you can use alcohol to clean the HICTOP Resin Magnetic Steel Plate.

Is the HICTOP Resin Magnetic Steel Plate customizable?

No. The HICTOP Resin Magnetic Steel Plate is not customizable however, it is available in different sizes for different types of 3d printers. You can contact the company for details.