Desktop 60W Laser Engraving Machine with LCD Digital Control,Monport Laser Engraver and Cutter Machine Cutting Nonmetal Materials w/High-Precision Guide Rail System,16×24″ Working Area

Description

Specification:
Working area: 16×24″
Laser Power:55W
Laser Tube Type：Sealed CO2 glass laser tube
Working voltage:AC110v, 60Hz
Required Operating Environment: Graphic Format Supported:AI, BMP, Dst, Dwg, DXP, PLT
Industrial Laser Head:Industrial Laser Head
Position system:Red dot sensor
Computer system:Windows XP/win7/ win8/win10
Cooling way: Water cooling (water pump include)

Attention
1.You should definitely run the water pump before you switch on the laser.
2.All the time connect the ground connector to a grounded outlet to help get rid of static electricity.
3.Make sure the coolant is not icy in the winter or too hot in the summer.A sudden shock of icy cold water rushing into the warm glass can break the glass laser tube and the laser tube could also explodes if it is over heated.
4.Keep the working table horizontal even as engraving.
5.Never tune the optics unless you have been properly trained.
6.The power supply required is 110V，60Hz.The coolant will have to be distilled water.

Make sure this fits by entering your model number.
【Intelligent Operation Panel】 Advanced LCD screen regulate board+USB port+office regulate,can work with computer or connect to U disk,supported corellaser,lightburn operating software.
【60W Powerful Laser Tube】 Powerful laser tube,keep let the engraving or cutting,high precision and more steady.The laser tube adopts the forced water-cooled valve rod,water pump can regulate temperature automatically.
【High Precision Laser Head】 Prime quality industrial laser head with fast speed,move X,Y,Z axis to cut and engrave the material.Compatible with multiple third party software,transmit files directly in CorelDraw,AutoCAD etc.
【Linear Guideway】 laser engraving machine adopts high-precision guide rail system to verify processing accuracy and service life,beehive-pattern Engraving and Cutting Platform cutter with 16x24in working area.
【Built-in Air pump】 An built-in fan can boost the performance,lower the noise level and support the ventilation.It’ll come with a water pump，let’s you run non stop all day without worrying about overheating the tube.