Amolen – 5 Color Pack PLA Filament Bundle

Amolen – Glow in The Dark Multicolor PLA Filament

$32.99

Categories: Filaments, PLA Tags: Filament, Materials, PLA

Description

Why did I buy glow Rainbow, but received glow Green?

The green color can glow well even not absorbing light energy, but other colors not, so that when you get the glow multicolor spool it only glow green color.

Please put the spool or prints into the strong sunlight or UV light for 30 minutes, then go to the dark room, you’re going to get amazing glow effect.Print 200g can get all colors. Enjoy your printing:)

As a result of there are 20% Luminous powders, The entire glow filaments in the marketplace are a bit brittle.Please print with patience and keep the angle smooth when feeding. It is best to use the filament feeder rack.

Please use nozzle which is 0.4mm or larger. The recommend temp is 200℃ and speed is 40mm/s.

SPECIFICATIONS

Material: Glow PLA Filament
Weight: 1kg (2.2 lb)
Diameter: 1.75mm
Dimensional Accuracy: +/- 0.03 mm

PRINT SETTING

Printing temperature: 190~ 220℃
Printing speed: 30-60mm/s
Bed temperature: 0 ~ 50℃
Nozzle ≥ 0.4mm

NOTE

Because of shooting light or display resolution, there are a little color shading between the pictures and filaments.
There is a little difference between different batches, so that it is strongly recommended to buy enough filament at one time.


	Wood+Marble+Shiny+Bronze	Matte Multicolor	Color Change in 0.1m	Silk Metal Multicolor	Glow Multicolor	Red Wood
Material	PLA	PLA	PETG	PLA	PLA	PLA
Weight	225g x 4	1kg	250g	1kg	1kg	1kg

Make sure this fits by entering your model number.
GLOW MULTICOLOR CHANGE – Every 10 Meters color change with Green,Blue,Purple and Pink. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament
UPGRADE GLOW FILAMENT – AMOLEN Makes a speciality of researching Glow in the Dark Filament, the use of the most advanced Glow materials, PLA raw materials come from USA. The entire glow filaments in the marketplace are a bit brittle, please print with patience and keep the angle smooth when feeding
HIGH COMPATIBILITY – Perfectly compatible with a few of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm
GIFT FOR KID – When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It’ll stimulate children’s imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children.
VACUUM & REUSABLE BAG – Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can also be put back into the bag after use and sealed for storage
ONE MONTH WARRANTY – Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament.
Printing temperature: 190~ 220℃
Printing speed: 30-60mm/s