Monoprice – Black PLA Filament

Description

Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice! PLA is a great choice for a printing material in case you are searching for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is subsequently also a bit more brittle. This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to verify accuracy over all the length of the filament. The negatives of the use of PLA is that it is at risk of degradation from moisture, sunlight, and heat. Additionally, it is more susceptible to overheating all over processing, which can cause dripping and drooping if it gets too hot.

Make sure this fits by entering your model number.
PLA is a great choice for a printing material in case you are searching for high accuracy and high resolution.
It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%).
This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm.
It has a nominal processing temperature of 210° C (410°F).
Thickness and roundness factors are laser measured at the factory to verify accuracy over all the length of the filament.