Aventik Eupheng High Precision Imitation Resin 3D 405nm LCD DLP Printer High Impact, High Strength, Low Porosity, High…

Description

ENGINEERING ULTRA-PRECISION: 20um deviation of each and every print axis. best selected 3 colors: Grey, Wax Red, and Aqua Green, bright and stunning color effect, show more clear gloss.
FAST CURING, HIGH PRECISION & EXCELLENT FINISH: Specially formulated to minimize volume shrinkage throughout the photo curing process, it ensures the high precision of the print model with great details and smooth finish. Its excellent fluidity and high molding efficiency shorten the printing cycle. LCD & DLP 405 wavelength machines, bottom layer exposure time 80-120 seconds, work piece layer exposure time 5-10 seconds, Layer thickness 0.05mm.
LOW ODOR: Specially formulated to decrease smell and environmentally friendly. Minimal dripping and weeping than a few of resins you used.
RIGID & TOUGHNESS: Good combination of hardness and toughness, which brings easy removal of the model and fine printing details.
Wide Compatibility: Make stronger 3D printers that utilize SLA, DLP or CLIP technologies with UV wavelengths between 350 and 405 nm. Great application in manufacturing, automotive, aerospace, engineering, fine art, Model, figure, architecture, design and more. Note: Final product processing, clean with alcohol, then irradiate with UV light for more than 10 minutes for secondary curing.

Ensure that this fits by entering your model number.
Aventik Eupheng Engineering Ultra Precision 20um deviation Red Wax Resin 3D SLA LCD DLP Printer High Have an effect on, High Strength, Easy and Fast Printing Photopolymer Resin Three Color Options. So as to achieve high precision printing, please double both the bottom layer exposure time and in addition the working piece exposure time. It implies that if your exposure time is 2s, now double it to 4s. please also reduce the lifting speed by half. Another way the print out might fails out.
FAST CURING, HIGH PRECISION & EXCELLENT FINISH: Specially formulated to minimize volume shrinkage throughout the photo curing process, it ensures the high precision of the print model with great details and smooth finish. Its excellent fluidity and high molding efficiency shorten the printing cycle. LCD & DLP 405 wavelength machines, bottom layer exposure time 80-120 seconds, work piece layer exposure time 5-10 seconds, Layer thickness 0.05mm.
LOW ODOR: Specially formulated to decrease smell and environmentally friendly. Minimal dripping and weeping than a few of resins you used.
RIGID & TOUGHNESS: Good combination of hardness and toughness, which brings easy removal of the model and fine printing details.
Wide Compatibility: Make stronger 3D printers that utilize SLA, DLP or CLIP technologies with UV wavelengths between 350 and 405 nm. Great application in manufacturing, automotive, aerospace, engineering, fine art, Model, figure, architecture, design and more. Note: Final product processing, clean with alcohol, then irradiate with UV light for more than 10 minutes for secondary curing.