Fulament Fula-Flex 2.0 SS PEI Build Sheet

Description

Fulament Fula-Flex 2.0 SS PEI Flex Bed build sheet for 3D Printing is an incomparably efficient build surface. The manufacturers claimed to use PEI (75% thicker) and steel (25% thicker) in its construction to ensure the long-term use of the build surface.

In addition, the Fulament Fula-Flex 2.0 SS PEI Flex Bed build sheet is easy to install. It is a dual-layered 3D build sheet. The user has to stick the lower 3M adhesive magnetic sheet onto the hotbed and adsorb the upper spring steel sheet onto the pre-installed magnetic sheet, level the printer, and your printer will be ready to generate your dream 3D prints!

The Fulament Fula-Flex 2.0 3D build plate’s upper sheet is flexible and removable. Once it gets cool down, you will simply take off the plate, slightly bend it, and will see how your model falls right into your hands!

Not only that, the Fulament Fula-Flex 2.0 SS PEI Flex Bed build sheet is compatible with most widely used filament materials including PLA, ABS, ASA, TPU, PETG, Nylon, Polycarbonate, and Anet A8, Cocoon 3D Printer, Wanhao Duplicator i3 V1/ Plus, etc. 3D printers. 

Moreover, it can tolerate hotbed temperatures up to 130°C without any warping or model deformation issues.

Technical Specifications:

• Brand: Fulament
• Size:  120mm x 120mm or 4.72*4.72 inches
• Style: Smooth / Textured Double Sided PEI
• Max. Temp. Tolerance: 130°C
• Compatible Filaments: PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!
• Compatible Printers: Anet A8, Cocoon 3D Printer, Wanhao Duplicator i3 V1/ Plus, etc.

FAQs:

Will the Fulament Fula-Flex 2.0 Spring Steel Sheet fir to my Ender 3 S1 Pro?

Yes. The Ender 3 S1 Pro has build dimensions “220*220*270mm” and the Fulament Fula-Flex 2.0 SS PEI Flex Bed build sheet is available in sizes from 120*120mm to 470*470mm. So, you can buy what suits your printer’s-built area.

Can I print PETG on the Fulament Fula-Flex 2.0 Spring Steel Sheet?

Yes. The Fulament Fula-Flex 2.0 SS PEI Flex Bed build sheet is compatible with PETG. However, some practical reviews showed that you have to use either hairspray or hot water just to remove the model at the end of printing because it sticks so firmly to the sheet and needs some effort to remove.

Do I need to attach Fulament Fula-Flex 2.0 Spring Steel Sheet with binder clips?

Yes. As a safety measure, you can use binder clips to keep in place the spring steel plate, however, it is not mandatory.