DR.3D 3D Printer Glow-in-The-Dark Resin for 3D Printing,405nm Low Oder 3D Resin Glow in The Dark, 500g

Description

HOW TO USE:

1. Shake the bottle for no less than 3 mins before use.
2. Allow the resin to rest for 10 minutes after shaking to let air bubbles escape before pouring into resin vat.
3. Add a small amount of resin a couple of times when printing

Note: This resin may also be poured back into the bottle after use, then again, it is very important check for residual pieces of polymer before doing so.

Slice Setting Suggestions

• Layer Height: 0.03-0.05mm
• Bottom Layer Count:4-6
• Bottom Lift Distance:5-8mm
• Lift Distance:5-8mm
• Bottom Lifting Speed:40-60mm/min
• Lifting Speed:60-90mm/min or 1-1.5mm/s
• Retract Speed:150-240mm/min or 2.5-4mm/s

➤Mono (4K) resin printer:

Exposure Time:10s-14s

Bottom Exposure Time:80s-120s

➤Color screen（2K) resin printer:

Exposure Time:18s-22s

Bottom Exposure Time:160s-200s

Make sure this fits by entering your model number.
【Glow in The Dark】Up to 2 hours glow effect.Rechargeable in sunlight, daylight, and artificial light.Ideal for outdoor applications
【Low shrinkage and high precision】 DR.3D glow at midnight resin owns low release force and good molding accuracy, which ensure your prints work come out with high definition and good details
【Easy to print】385 – 405nm wavelength 3D printer compatibility. Low density and high fluidity make the the 3d printer resin reduce the printing time and easy to molding, keep a higher printing success rate.
【Broad Applicability】Suitable for all kinds of prints as a result of its beautiful green-glowing effects,such as decorations for Halloween.
【Secure and low odor】 DR.3D LCD Printer resin is specially formulated to reduce odor. It was once passed the Material Safety Data Sheet (MSDS) and RoHS certification as well. Any problem please contact us, 24-hour professional customer service will be offered.